Steam and vapour are quite often used interchangeably. But there is a subtle difference between the two. Look at this picture. what do you see? Most people tend to answer that the water is boiling and they can see that white smoky substance as ste
Learn More(If you already know, please skip to the next section.) If you have a steam boiler, your boiler system produces steam. Steam leaves the boiler through piping to transfer heat to something; usually a heat exchanger or steam jacket. When the steam condenses in the pipe it is called condensate. This condensate water has very little impurities in it.
Learn Moresaturated steam temperatures pressure table steam temperature. created date: 10/24/2012 5:43:28 pm
Learn MorePressurised Condensate Recovery Module (PCRM) is also a unique system wherein the condensate generated from your process is fed back under pressure directly to the boiler, unlike any other conventional condensate recovery system where the condensate is discharged at atmospheric pressure.
Learn MoreOct 22, 2017 · This free carbon dioxide gas (CO 2 ) is volatile and leaves the boiler with the steam and reacts with condensed water to form carbonic acid. CO 2 + H 2 O à H 2 CO 3. Carbonic acid is a weak acid, but as the condensate water is pure, this weak acid reduces the pH significantly, often in the range of 5-6. At this low pH, the condensate water is
Learn MoreOct 22, 2017 · This free carbon dioxide gas (CO 2) is volatile and leaves the boiler with the steam and reacts with condensed water to form carbonic acid CO 2 + H 2 O à H 2 CO 3 Carbonic acid is a weak acid, but as the condensate water is pure, this weak acid reduces the pH significantly, often in the range of 5-6.
Learn MoreThe following disadvantages of the simple open steamcondensate system can be identified: losses of the water vapor flowing from the open condensate reservoir in the atmosphere; cavity operating conditions of the condensate pumps; mismatched operation of the condensate reservoir, condensate pump and boiler supply reservoir; and technical problems with maintenance and servicing of the equipment.
Learn MoreOct 18, 2015 · In an open vapor system, the pressure at the boiler is 1 to 5 oz, or enough to overcome the frictional resistance of the piping system. The pressure at vent is zero gauge, or atmospheric. In oper- ation, steam is maintained at about 5 oz pressure in the boiler by the action of the automatic damper regulator.
Learn MoreThe following disadvantages of the simple open steamcondensate system can be identified: losses of the water vapor flowing from the open condensate reservoir in the atmosphere; cavity operating conditions of the condensate pumps; mismatched operation of the condensate reservoir, condensate pump and boiler supply reservoir; and technical problems with maintenance and servicing of the equipment.
Learn MoreMay 22, 2018 · Steam traps are used to efficiently collect the condensate for return to the deaerator or feedwater tank. At this point, condensate mixes with the fresh makeup water in a deaerator or feedwater tank. This mixture now becomes the feedwater that is pumped back into the boiler when necessary to compensate for water losses that occur during steam
Learn MoreTo protect the boiler itself and the flue gas system from this acidic steam, older boilers direct the flue gases outside. Depending on the heating technology, the exhaust gas temperature can be up to 200 degrees Celsius. Condensation of the water vapour in the exhaust gases is thus deliberately prevented.
Learn Morefeatures condensing gas steam boilers. Condensing boiler - Wikipedia. 2019-7-16 · Condensing boilers are water heaters fueled by gas or oil. They achieve high efficiency (typically greater than 90% on the higher heating value) by condensing water vapour in the exhaust gases and so recovering its latent heat of vaporisation, which would otherwise have been wasted.This condensed vapour leaves
Learn MoreThe heat transfer rate in a condensing steam flow rate of 8 kg/h (0.0022 kg/s), atmospheric pressure and temperature 100 oC - can be calculated as. q = (2257 kJ/kg) (0.0022 kg/s) Sponsored Links. Steam Thermodynamics - Thermodynamics of steam and condensate applications. en: condensing condensation steam heat transferred transfer.
Learn MoreThe actual vapor power cycle differs from the ideal Rankine cycle because of irreversibilities in the inherent components caused by fluid friction and heat loss to the surroundings; fluid friction causes pressure drops in the boiler, the condenser, and the piping between the components, and as a result the steam leaves the boiler at a lower
Learn MoreApr 09, 2013 · The flue gases emanating from condensing boilers are chemically similar to those from conventional boilers, being mostly carbon dioxide and slightly acidic water vapour (enough to damage the
Learn More